Experimental study and numerical modeling of brittle fracture of carbonate rock under uniaxial compression

The brittle carbonate rock taken from the Tarim Oilfield is tested in laboratory under uniaxial compression. The acoustic emission (AE) is used to monitor the microcracking activity in rock during the experiment. Moreover, the 3D tomograms of carbonate rock after uniaxial compression are obtained by using CT imaging technology, which indicates that microcracks mutually interconnect and eventually form macroscopic fractures after failure. The PFC2D is used to model the behavior of brittle rock including microcracks propagation. The stress–strain curve and cracks distribution in rock model are obtained from the PFC simulation. The numerical results agree with the experimental test well.     

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

The transverse and longitudinal mechanical properties of aramid fibers like Kevlar? 29 (K29) fibers are strongly linked to their highly oriented structure. Mechanical characterization at the single fiber scale is challenging especially when the diameter is as small as 15 µm. Longitudinal tensile tests on single K29 fibers and single fiber transverse compression test (SFTCT) have been developed. Our approach consists of coupling morphological observations and mechanical experiments with SFTCT analysis by comparing analytical solutions and finite element modeling. New insights on the analysis of the transverse direction response are highlighted. Systematic loading/unloading compression tests enable to experimentally determine a transverse elastic limit. Taking account of the strong anisotropy of the fiber, the transverse mechanical response sheds light on a skin/core architecture. More importantly, results suggest that the skin of the fiber, typically representing a shell of one micrometer in thickness, has a transverse apparent modulus of 0.2 GPa. That is around more than fifteen times lower than the transverse modulus of 3.0 GPa in the core. By comparison, the measured longitudinal modulus is about 84 GPa. The stress distribution in the fiber is explored and the critical areas for damage initiation are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 374–384     

Wrinkle morphologies with two distinct wavelengths

Wrinkles with two distinct wavelengths formed sequentially on the same surface are investigated. A series of aligned wrinkles are formed through local strain application on a partially crosslinked elastomer. After the formation of these primary wrinkles, the elastomer is fully crosslinked, and a mechanical compressive strain is applied to the sample orthogonal to the primary wrinkles. This mechanical strain results in smaller secondary wrinkles superimposed on the larger primary aligned wrinkles. Resulting biaxial morphologies suggest that the primary pattern directs the formation of the smaller wrinkles. The modulus mismatch of the substrate on primary and secondary wrinkle formation dictates the ratio between the two resulting wavelengths, as well as the specific biaxial morphologies, ranging from zigzag ridges to ellipsoidal bumps or corn‐on‐the‐cob structures to the classic herringbone. The sequential strain wrinkling process has the potential to be used on an industrial scale for the facile formation of surface topography with two discrete, tunable lateral dimensions over large surface areas. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Orientation-dependent deformation mechanisms of bcc niobium nanoparticles

Nanoparticles usually exhibit pronounced anisotropic properties, and a close insight into the atomic-scale deformation mechanisms is of great interest. In present study, atomic simulations are conducted to analyse the compression of bcc nanoparticles, and orientation-dependent features are addressed. It is revealed that surface morphology under indenter predominantly governs the initial elastic response. The loading curve follows the flat punch contact model in [1 1 0] compression, while it obeys the Hertzian contact model in [1 1 1] and [0 0 1] compressions. In plastic deformation regime, full dislocation gliding is dominated in [1 1 0] compression, while deformation twinning is prominent in [1 1 1] compression, and these two mechanisms coexist in [0 0 1] compression. Such deformation mechanisms are distinct from those in bulk crystals under nanoindentation and nanopillars under compression, and the major differences are also illuminated. Our results provide an atomic perspective on the mechanical behaviours of bcc nanoparticles and are helpful for the design of nanoparticle-based components and systems.     

Temperature dependence of the properties of ternary systems ethanol + water + an aliphatic alkane (C6-C9)

The measures and calculation of different properties such as refractive index, density, speed of sound, excess molar volume, and isentropic compressibility of the ternary heterogeneous compounds by ethanol + water + (n-hexane, n-heptane, n-octane, n-nonane) have been performed in the range 288.15–323.15 K and atmospheric pressure. Attending to the accurate results of these models, the equation of state enclosing mixing rules is indicated as a simple estimation of the procedures of these properties for this kind of multicomponent systems.     

Effects of graded porous structure on local strain distribution under compression in silicone rubber

Silicone rubber samples with gradually changing pore sizes within the range of 70–610 μm are produced using an improved spacer method. The samples are scanned using an X‐ray computed tomography to evaluate their graded structure as compared to uniform rubber. A compressive test reveals that graded porous silicone rubber has characteristic stress–strain curves whose slope changes within a specific strain range depending on the porous structure. Analysis results of local strain based on a digital image correlation of the graded porous silicone rubber under compression demonstrate that the characteristic stress–strain properties are caused by shifts in the main deformation region in the graded structure. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1033–1042     

Viscous flow in a mixed compression intake

Numerical simulation of the flow in a two‐dimensional mixed compression intake is carried out by solving unsteady viscous compressible equations using a stabilized finite element method. The effect of bleed in starting/unstarting of the intake and controlling the buzz instability is investigated in detail. Higher bleed leads to an increase in the ability of the intake to sustain larger back‐pressure for stable operation. The amount of bleed and its location is varied to understand its effect on the performance of the intake. Two kinds of unsteady oscillations are observed: ‘little’ and ‘big’ buzz. The frequency of the both kinds of buzz oscillations is found to be super‐harmonic of the fundamental acoustic frequency of intake modeled as an open‐closed organ pipe. The frequency as well as amplitudes of the big buzz cycles is larger than those of the little buzz. The little‐ and big‐buzz are found to occur for low‐ and high‐subcritical state of the intake and are very similar to Ferri and Dailey criteria, respectively. Buzz is eliminated when relatively high bleed is implemented, both, upstream and downstream of the throat. The effect of rate of change of back‐pressure on the start/unstart of the intake is investigated. Two situations are considered. The first case is that of an intake where the back‐pressure remains below the critical value. It is found that the intake remains started if the change in back‐pressure is gradual. However, it unstarts if the back‐pressure is changed relatively rapidly. The second set of simulations is an attempt to model the situation where the back‐pressure at the exit of the intake exceeds the critical value and a logic is incorporated in the feed back loop of the fuel modulation to start the intake. Low rate of change of pressure is unsuccessful in starting the intake. Relatively high rates result in either a quick starting of the intake or a slow unstart. Copyright © 2010 John Wiley & Sons, Ltd.     

A note on compressive limiting for two‐material flows

In this short note we describe a simple extension to the multi‐material shock‐capturing algorithm presented in (J. Comput. Phys. 2007; 223 :262–297) that can be used to maintain sharp material interfaces. The method takes the form of an artificial compression which is designed so that the material indicator jumps across only a few cells but which does not excite physical instabilities in the flow. The advantages of the approach include its simplicity and flexibility in that it provides a parameter that effectively determines the captured interface thickness. Copyright © 2009 John Wiley & Sons, Ltd.     

字符串匹配算法在DNA序列比对中的应用

高通量测序技术的飞速发展让生物信息领域迎来了大数据时代。新技术在提供海量生物遗传信息的同时,也给分析这些数据带来了新的挑战。DNA序列比对是信息分析流程中的关键步骤,为后续的变异检测提供序列比对信息。2015“深圳杯”数学建模夏令营B题以DNA序列比对为研究课题,希望参赛学生给出序列快速比对的最佳方案。本文简要点评了各参赛队伍的解答情况,然后介绍了现有DNA序列比对软件中用到的算法和数据结构。